South Stirlings, Western Australia
In early 2026, Swan Aerial Services was engaged to complete a large-scale aerial LiDAR survey over a broadacre cropping property in the South Stirlings region of Western Australia. The total survey area covered approximately 350 hectares of mixed cropping paddocks.
Project Background
The purpose of the survey was to generate high-accuracy elevation data that could be directly integrated into farm machinery software to support paddock grading. The client’s objective was to establish a consistent percentage fall across multiple paddocks, directing surface water toward existing and planned drainage ditches.
This requirement followed an exceptionally high rainfall season the previous year. Prolonged waterlogging and flooding in low-lying areas resulted in the loss of approximately 150 hectares of crop, highlighting the limitations of existing drainage and the difficulty of identifying subtle elevation changes across large paddocks using traditional methods.
Survey Methodology
To meet the accuracy and scale requirements of the project, Swan Aerial Services deployed a DJI Matrice 350 RTK (M350) RPAS equipped with a LiDAR payload. LiDAR was selected over photogrammetry due to its ability to:
- Capture reliable elevation data across uniform crop stubble and bare soil
- Reduce sensitivity to lighting conditions and surface texture
- Deliver consistent results over large, relatively flat areas
The aerial survey was flown using RTK positioning, providing real-time positional accuracy during data capture. To further refine the dataset, Ground Control Points (GCPs) were established and used during post-processing to validate and tighten vertical and horizontal accuracy.
Data Outputs
The primary deliverable for the client was a Digital Surface Model (DSM) with centimetre-level accuracy. The dataset was processed to ensure compatibility with industry-standard farm design and machinery control software, allowing it to be used directly for:
- Designing paddock grading plans
- Setting machinery guidance and blade control parameters
- Verifying drainage gradients before ground works commenced
The high resolution of the LiDAR data allowed subtle elevation changes, often difficult to detect visually in broadacre environments, to be clearly identified and modelled.
Practical Outcomes
By using a LiDAR-derived DSM rather than relying on assumptions or sparse ground measurements, the client was able to:
- Design drainage works with confidence in the intended fall direction and gradient
- Reduce the risk of over- or under-cutting during grading
- Minimise rework and unnecessary soil movement
- Address known flood-prone areas with targeted intervention rather than broad, costly earthworks
Most importantly, the data provided a foundation for improving paddock resilience against future high-rainfall seasons, helping to protect productive land that had previously been lost to inundation.
Summary
This project demonstrates how RPAS-based LiDAR surveying can be applied practically in broadacre agriculture, particularly where large areas, shallow gradients, and drainage performance are critical factors. Accurate elevation data enables informed decisions before machinery enters the paddock, reducing risk and improving long-term outcomes.
For farms operating at scale, especially in regions prone to variable rainfall, access to precise terrain data can be the difference between reactive fixes and planned, repeatable solutions.
